Difference between revisions of "Lock-in Amplifier"
(Created page with " == What is a Lock-In Amplifier? == A lock-in amplifier is a type of amplifier used to extract quiet signals out of noisy data.") |
|||
| Line 2: | Line 2: | ||
== What is a Lock-In Amplifier? == | == What is a Lock-In Amplifier? == | ||
| − | A lock-in amplifier is a type of amplifier used to extract quiet signals out of noisy data. | + | A lock-in amplifier is a type of amplifier used to extract quiet signals out of noisy data. High quality lock-in amplifiers can extract signals up to a million times quieter than the surrounding noise. The output of a lock-in amplifier is a DC signal showing the strength of the signal to be extracted. |
| + | |||
| + | == How Does a Lock-In Amplifier Work? == | ||
| + | |||
| + | Conceptually, a lock-in amplifier works by exploiting the orthogonality of sinusoidal functions. Use of a lock-in amplifier requires a clear reference signal at the frequency of the signal to be extracted. This reference signal is multiplied by the noisy input signal and then integrated over a set time. When sinusoidal functions are multiplied together and integrated over a significant amount of time, the result will be zero unless the two sinusoidal functions have the same frequency. For the output of a lock-in, this means that the contributions of all signals not at the reference frequency will be attenuated very close to zero. This is the before-mentioned orthogonality of sinusoidal functions. This means the output is a DC signal showing the strength of the original signal at the reference frequency. | ||
Revision as of 13:02, 11 April 2016
What is a Lock-In Amplifier?
A lock-in amplifier is a type of amplifier used to extract quiet signals out of noisy data. High quality lock-in amplifiers can extract signals up to a million times quieter than the surrounding noise. The output of a lock-in amplifier is a DC signal showing the strength of the signal to be extracted.
How Does a Lock-In Amplifier Work?
Conceptually, a lock-in amplifier works by exploiting the orthogonality of sinusoidal functions. Use of a lock-in amplifier requires a clear reference signal at the frequency of the signal to be extracted. This reference signal is multiplied by the noisy input signal and then integrated over a set time. When sinusoidal functions are multiplied together and integrated over a significant amount of time, the result will be zero unless the two sinusoidal functions have the same frequency. For the output of a lock-in, this means that the contributions of all signals not at the reference frequency will be attenuated very close to zero. This is the before-mentioned orthogonality of sinusoidal functions. This means the output is a DC signal showing the strength of the original signal at the reference frequency.
