- Saturation

From Advanced Projects Lab
Revision as of 15:59, 15 February 2019 by Bsboggs (talk | contribs)
Jump to: navigation, search

Saturation

Previously, we considered the interaction between the spins and lattice and found the characteristic relaxation time . That is, when the spin temperature is different than the lattice temperature how long does it take for the spin temperature to return to the lattice temperature? Answer: .

We then discussed spin-spin interactions which led to the notion of inhomogeneous broadening by a spatially-varying local magnetic field. This led to the concept of a phase-memory time constant . That is, when two nearly-resonant spins are excited then allowed to freely decay (RF field off) how long before the two spins are out of phase? Answer: .

We now investigate the steady-state behavior of the spin-lattice system with an applied transverse RF field.

In the absence of the transverse RF field, the differential equation describing the time variation of , the excess number of nuclei in the lower state, is . This makes sense because if then is greater than zero () and there's a net flow of nuclei into the lower state with a characteristic time constant .

When the transverse RF field is present, another term must be added to account for the induced upward transitions corresponding to a net absorption of energy so that we get , where is the probability per unit time that a nuclei makes an upward transition. A steady state is reached when so that a steady-state value of is given by . It can be seen that decreases as or increases.

We must now evaluate the transition probability . If a transverse RF field is applied with the correct sense of rotation at the resonant frequency the probability of a transition in unit time between the states is given (with the help of Fermi's golden rule) by

, where is the appropriate matrix element of the nuclear spin operator.

For it can be shown that . For the case of this reduces to

so that we have

.

If an RF field is applied, whose amplitude is large, becomes quite small; the spin temperature becomes very high and the spin system is said to be saturated. Remembering that we can write

, where is the value of the saturation factor at the maximum of the lineshape function .

Recall that, in thermal equilibrium, the lattice temperature is defined in terms of as . Similarly, when the system is not in thermal equilibrium, the spin temperature is related to as . These two results yield

.

The spins can easily be heated up to extremely high temperatures. For example, at room temperature for , a transverse field of 0.1 Gauss, (cold water) and seconds, giving a spin temperature .