MgB2 Superconductor

From Advanced Projects Lab
Revision as of 11:56, 11 May 2018 by Bsboggs (talk | contribs) (MgB2 Superconductor Project)
Jump to: navigation, search

MgB2 Superconductor Project

Preparing Samples

1) Weigh appropriate amounts of Mg and B powders.
2) Mix and grind powders (in mortar) for ~ 15 minutes.
3) Pack and press the resulting powder into sheathing material.
4) Mechanically deform sample (crush the core) into a slug, ribbon or wire.
5) Heat (possibly two or more temps for two or more times).

Processing Post-Reacted Samples

1) Cut off sample ends (exposing clean sample cores).
2) Polish sample ends.