General Lab Equipment Obstacle Course
A general primer in important equipment in a scientific laboratory.
Contents
Multimeters
The multimeter module will introduce you to use of a Fluke 179 Multimeter. It will cover the following topics:
- Measuring voltage
- Measuring current
- Measuring resistance and testing for continuity
- Diode check
- AC signals, frequency response
- Capacitance
- Clamp meter
- Temperature Measurements
This module is here.
Power Supplies
This module will introduce you to the
- Digital and Analog
- Floating and grounding
- Current/voltage limiting
The module is here.
Function Generators and Oscilloscopes
This module will introduce you to use of the Rigol DG1022 Function Generator and the DS1102E Oscilloscope. The following topics will be introduced:
Function Generator Topics:
- Frequency, amplitude, offset, phase
- Frequency sweep/ramp
- Sine, square (incl. TTL), triangle, sawtooth, arbitrary waveforms (possibly a demonstration of Fourier components)
O-scope Topics:
- Voltage/time scale
- Coupling
- Triggering
- Scope probes
- Termination
- Bandwidth, sampling
- Aliasing
- Analyzing data: cursors, averaging, math menu
- Exporting data
- Analog and digital scopes
The module is available here.
RF Signals
- Measuring RF power
- Termination and impedance matching
- Attenuation and filtering
- Splitters, mixers, and switches
The module is available here.
Lock-in Amplifier
- Basic idea of operation; reason for using
- Use switch to turn on and off a highly attenuated signal and detect it with the lock-in
The module is available here.
Frequency Counters
Measure the frequency of an RF source; map frequency vs. voltage curve of a voltage controlled oscillator (VCO)
The module is available here.
RF Spectrum Analyzer
Always be careful to ensure signal input to spectrum analyzer is not too large
- What does a spectrum analyzer do?
- Attach wire-loop antenna and find radio stations
- Mix two RF signals and observe the expected spectrum
- Measuring amplitude of signal above background
- Save and export data
The module is available here.
Soldering
- Soldering technique
- Cleaning iron tip
- Heat pieces to be soldered (hot iron, short time)
- Avoid cold solder joints
- Look for shiny and smooth result
- Tools of the trade: heatshrink tubing, desoldering pump, solder wick, wire strippers, soldering gun, heat gun, rosin flux
- Solder end of DB9 cable (using only 4 or 5 conductors) to practice stripping wire, using heatshrink tubing, and creating usable product
- Construct voltage divider on perfboard with BNC input/output connectors
The module is available here here.
