Electronics

From Advanced Projects Lab
Revision as of 14:39, 21 March 2014 by Admin (talk | contribs)
Jump to: navigation, search

-Electronics-

Winter 2014 For my project I am building an electric guitar analog effects pedal. The pedal is called the "Tube Screamer" and is an overdrive effect, which clips an amplified signal.

Why build a guitar pedal? I want to understand what makes overdrive sound good. Oftentimes, when people speak of "distortion", they are talking about noise that is unwanted, but with guitars, there is a good distortion, which make the guitar signal sound good. As I built the pedal, I analyzed it with an oscilloscope, as well as did research, to better understand what makes it sound qualitatively good to human ears.

Basic Guitar Physics

  • An electric guitar works by converting sound into an alternating current, using pickups. A pickup is a magnet with wire densely coiled around it. It creates a magnetic field around the guitar string, so that when the string vibrates, there is a change in the magnetic field, and a voltage is created in the coiled wires.

Pickup Schematic.gif Fender guitar pickups.jpg

The signal then goes through the effects pedal and then is turned back into sound waves at the speaker.

TubeScreamer.jpg

Vox AC30.jpg

So if we are sending a clean signal into the effect, what will come out?

  • To answer that question we will look at what the circuit is, qualitatively and quantitatively.

Qualitatively:

  • This is the layout I used to wire up my circuit:
Layout TubeScreamer.gif

And this is what the circuit looked like when I finished:

0315141950-01.jpg
And this is how it looks in an enclosure



Quantitatively:

  • This is the circuit diagram:
Tube Screamer Anatomy.gif