Difference between revisions of "MgB2 Superconductor"
(Created page with "== MgB2 Superconductor Project == === Preparing Samples === 1) Weigh appropriate amounts of Mg and B powders.<br> 2) Mix and grind powders (in mortar) for ~ 15 minutes.<br> 3...") |
(→MgB2 Superconductor Project) |
||
| Line 6: | Line 6: | ||
3) Pack and press the resulting powder into sheathing material.<br> | 3) Pack and press the resulting powder into sheathing material.<br> | ||
4) Mechanically deform sample (crush the core) into a slug, ribbon or wire.<br> | 4) Mechanically deform sample (crush the core) into a slug, ribbon or wire.<br> | ||
| − | 5) Heat.<br> | + | 5) Heat (possibly two or more temps for two or more times).<br> |
| + | |||
| + | === Processing Post-Reacted Samples === | ||
| + | 1) Cut off sample ends (exposing clean sample cores).<br> | ||
| + | 2) Polish sample ends.<br> | ||
Revision as of 11:56, 11 May 2018
MgB2 Superconductor Project
Preparing Samples
1) Weigh appropriate amounts of Mg and B powders.
2) Mix and grind powders (in mortar) for ~ 15 minutes.
3) Pack and press the resulting powder into sheathing material.
4) Mechanically deform sample (crush the core) into a slug, ribbon or wire.
5) Heat (possibly two or more temps for two or more times).
Processing Post-Reacted Samples
1) Cut off sample ends (exposing clean sample cores).
2) Polish sample ends.
