Difference between revisions of "Master Oscillator Power Amplifier Pulsed Laser"
Aplstudent (talk | contribs) (Created page with "'''MOPA (Master Oscillator Power Amplifier)''' This fiber laser will consist of three stages: 1st: Master Oscillator (this is the stage that will contain the graphene and wi...") |
Aplstudent (talk | contribs) |
||
| Line 8: | Line 8: | ||
3rd: Double-Clad Power Amplifier | 3rd: Double-Clad Power Amplifier | ||
| + | |||
| + | Master Oscillator with graphene as saturable absorber: | ||
| + | |||
| + | [[File:MasterOscillator.jpg|500px]] | ||
| + | |||
| + | |||
| + | The lengths of Erbium-doped fiber are chosen based on RP Fiber Power simulation: | ||
| + | |||
| + | [[File:FiberLength.jpg|500px]] | ||
Revision as of 13:30, 16 June 2015
MOPA (Master Oscillator Power Amplifier)
This fiber laser will consist of three stages:
1st: Master Oscillator (this is the stage that will contain the graphene and will produce the pulsing)
2nd: Single-Mode Power Amplifier
3rd: Double-Clad Power Amplifier
Master Oscillator with graphene as saturable absorber:
The lengths of Erbium-doped fiber are chosen based on RP Fiber Power simulation:
