Difference between revisions of "Fiber Optics"
(One intermediate revision by the same user not shown) | |||
Line 6: | Line 6: | ||
[[File:Fiber_mating_sleeves.png|600px]][[File:Fiber.3.gif|right]] | [[File:Fiber_mating_sleeves.png|600px]][[File:Fiber.3.gif|right]] | ||
− | [[File:Dc.png| | + | [[File:Dc.png|800px]] |
+ | |||
+ | |||
+ | == Connectorizing optical fiber == | ||
+ | '''Remember to practice safety when breaking fiber and handling broken ends: wear safety glasses and tape up ends''' | ||
+ | |||
+ | The following list discusses the highlights of connectorizing fiber. Consult Thorlab's [[Media:FN96A-Manual.pdf| Fiber Polishing and Connectorization Manual]] for a more complete description. | ||
+ | <ul> | ||
+ | <li> Strip coating from fiber, leaving 2-3 inches of bare fiber </li> | ||
+ | <li> Prepare epoxy (EpoTek 353ND, mixing ratio 10:1 A:B by weight) </li> | ||
+ | <li> Inject epoxy into connector </li> | ||
+ | <li> Insert bare fiber through ferrule and cure epoxy (20 min @ 120 C, or level 6 on our oven) </li> | ||
+ | <li> Use diamond tipped blade to score and cleave fiber just above epoxy bead </li> | ||
+ | <li> Hand polish tip until fiber is flush with epoxy </li> | ||
+ | <li> Polish using abrasion sheets and polishing puck: 30um (green), 6um (yellow), 3um (red), 1um (white) </li> | ||
+ | </ul> | ||
Latest revision as of 11:14, 12 November 2015
Fiber Basics
Connectorizing optical fiber
Remember to practice safety when breaking fiber and handling broken ends: wear safety glasses and tape up ends
The following list discusses the highlights of connectorizing fiber. Consult Thorlab's Fiber Polishing and Connectorization Manual for a more complete description.
- Strip coating from fiber, leaving 2-3 inches of bare fiber
- Prepare epoxy (EpoTek 353ND, mixing ratio 10:1 A:B by weight)
- Inject epoxy into connector
- Insert bare fiber through ferrule and cure epoxy (20 min @ 120 C, or level 6 on our oven)
- Use diamond tipped blade to score and cleave fiber just above epoxy bead
- Hand polish tip until fiber is flush with epoxy
- Polish using abrasion sheets and polishing puck: 30um (green), 6um (yellow), 3um (red), 1um (white)
Some useful fiber polishing pictures
Other useful links:
Double-Clad Fibers - Wikipedia
RP's Passive Fiber Optics Tutorial